200A How to fit in Clamshell case

Post your tech questions here, lots of knowledge available.
Post Reply
greatfactor
Junior Member
Posts: 3
Joined: Thu Nov 26, 2020 12:57 am

200A How to fit in Clamshell case

#1

Post by greatfactor »

May I ask for advise

About Yellow clamshell case size of 200A
Can anyone show the correct direct to fit lantern in this case

I try many direction but it seem not right
User avatar
Leviticus_Tomethreus
Super Colemanaholic
Posts: 3098
Joined: Tue Aug 04, 2020 5:23 am

Re: 200A How to fit in Clamshell case

#2

Post by Leviticus_Tomethreus »

is it a tall vent 200a? Those don’t work. Only short vent 220/228 and 200a work in clamshell. Guillotine cases are for tall vent.
My friends don’t call me “Lantern/lampie Levi” for nothin’,if they did call me that.
Looking for bday lanterns 8/38, 8/41,
10/25, and 8/07
The biggest lie I tell myself is ”I don’t need to write that down, I’ll remember it.”
“People say nothing is impossible, but I do nothing everyday” -A.A. Milne
Now officially ICCC member #1995. Most likely the youngest member with a registered name.

You guessed it, Levi Tomey 
greatfactor
Junior Member
Posts: 3
Joined: Thu Nov 26, 2020 12:57 am

Re: 200A How to fit in Clamshell case

#3

Post by greatfactor »

Leviticus_Tomethreus wrote: Sun Feb 21, 2021 1:04 pm is it a tall vent 200a? Those don’t work. Only short vent 220/228 and 200a work in clamshell. Guillotine cases are for tall vent.
Low vent
User avatar
Leviticus_Tomethreus
Super Colemanaholic
Posts: 3098
Joined: Tue Aug 04, 2020 5:23 am

Re: 200A How to fit in Clamshell case

#4

Post by Leviticus_Tomethreus »

greatfactor wrote: Sun Feb 21, 2021 1:04 pm
Leviticus_Tomethreus wrote: Sun Feb 21, 2021 1:04 pm is it a tall vent 200a? Those don’t work. Only short vent 220/228 and 200a work in clamshell. Guillotine cases are for tall vent.
Low vent
Should just be able to slide it in there. Oh! Might be because you need the 200a puck inside rather than 275 or 220 puck.
My friends don’t call me “Lantern/lampie Levi” for nothin’,if they did call me that.
Looking for bday lanterns 8/38, 8/41,
10/25, and 8/07
The biggest lie I tell myself is ”I don’t need to write that down, I’ll remember it.”
“People say nothing is impossible, but I do nothing everyday” -A.A. Milne
Now officially ICCC member #1995. Most likely the youngest member with a registered name.

You guessed it, Levi Tomey 
User avatar
Ridge_Runner
Super Colemanaholic
Posts: 1492
Joined: Wed Aug 29, 2018 11:39 pm

Re: 200A How to fit in Clamshell case

#5

Post by Ridge_Runner »

Should slide in like this:

Image

Edit: If you have an accessory safe on the bottom of your 200A, you’ll need to remove it.
— L.J.

Looking for 10/2015 & 1/2020 B-Day Lanterns
I love the smell of naphtha in the morning!
"Ain’t no need to watch where I’m goin’; just need to know where I’ve been" -Tow Mater
greatfactor
Junior Member
Posts: 3
Joined: Thu Nov 26, 2020 12:57 am

Re: 200A How to fit in Clamshell case

#6

Post by greatfactor »

Ridge_Runner wrote: Sun Feb 21, 2021 2:14 pm Should slide in like this:

Image

Edit: If you have an accessory safe on the bottom of your 200A, you’ll need to remove it.
Thanks a lot.
User avatar
Ridge_Runner
Super Colemanaholic
Posts: 1492
Joined: Wed Aug 29, 2018 11:39 pm

Re: 200A How to fit in Clamshell case

#7

Post by Ridge_Runner »

greatfactor wrote: Sun Feb 21, 2021 3:25 pmThanks a lot.
You’re very welcome 🙂

And, welcome to the CCF!
— L.J.

Looking for 10/2015 & 1/2020 B-Day Lanterns
I love the smell of naphtha in the morning!
"Ain’t no need to watch where I’m goin’; just need to know where I’ve been" -Tow Mater
Post Reply