Lantern 220K schematic

Post your tech questions here, lots of knowledge available.
Post Reply
rwday
Junior Member
Posts: 4
Joined: Thu Sep 01, 2022 2:51 am

Lantern 220K schematic

#1

Post by rwday »

Hello Everyone!

I'm very excited to be a part of this group and look forward to learning form all of you.

I have a model 220K lantern that i recently refurbished; paint and new generator.
It lights quickly and burns well; however, I have flame emitting from the area around the frame jam nut. There is a half circle washer that I thought went below the frame jam nut, yet there is an opening to to fountain and the part that provides fuel to the generator.

I can't seem to find a video or schematic that shows the assembly.

Any assistance is greatly appreciated.

Thanks,

Ralph
User avatar
Volvoguy
Colemanaholic
Posts: 400
Joined: Sun Jul 18, 2021 12:26 am

Re: Lantern 220K schematic

#2

Post by Volvoguy »

Old Cat
Senior Member
Posts: 219
Joined: Thu May 19, 2022 10:28 pm

Re: Lantern 220K schematic

#3

Post by Old Cat »

Welcome to the forum. Check the generator jamb nut and make sure it is not cross threaded and is snug. This could be your issue. I suggest not lighting until you have issue solved. Others will chime in with more knowledge on your problem.

Thanks,

Dan
Thanks,
Dan

When your train of thought leaves the station and you’re left standing in the middle of the station wondering why you are there. What can this mean? ...Too many birthdays? ...Maybe? ...Oh noooo! ...Keep celebrating everyone the Lord sends. O.C.
bluepen61
Colemanaholic
Posts: 430
Joined: Sun Oct 25, 2009 11:33 pm

Re: Lantern 220K schematic

#4

Post by bluepen61 »

In addition to Old Cat's suggestions, I would inspect and clean the mating surfaces of the generator and valve body. Sometimes particles of dirt might be present that allows fuel to leak through. Also, the flare of the generator might become cracked too. I hope you find and cure the issue.
John L. Kemmis ICCC #703
Bernz Appreciation Club #007
I collect the Coleman 290 series
and the usual unusual ones.
rwday
Junior Member
Posts: 4
Joined: Thu Sep 01, 2022 2:51 am

Re: Lantern 220K schematic

#5

Post by rwday »

Thanks to everyone who responded.
Got it repaired!!
Lines
Colemanaholic
Posts: 348
Joined: Sat Jun 25, 2022 11:45 am

Re: Lantern 220K schematic

#6

Post by Lines »

Glad you solved the problem. Welcome from Alabama!
Robert
Looking for 10/59 lantern or fount for rebuilder.
Prefer a 228E, but not that set on it.
Any 10/59 lantern or fount.
Old Cat
Senior Member
Posts: 219
Joined: Thu May 19, 2022 10:28 pm

Re: Lantern 220K schematic

#7

Post by Old Cat »

Good for you. Tell us how you solved your problem.
Thanks,
Dan

When your train of thought leaves the station and you’re left standing in the middle of the station wondering why you are there. What can this mean? ...Too many birthdays? ...Maybe? ...Oh noooo! ...Keep celebrating everyone the Lord sends. O.C.
Post Reply