Valve & F/A Tube Diagrams for Lantern and Stove

[curlyjoe_99]

While waiting for a paint job on a M1950 to bake, I went hunting and found the following diagrams of the Valve and the F/A tube and how they work. they came out of an Old Technical manual (TM) from back in the 40's. the Manual is: TM 8-615 "Gasoline Stove and Burners" if it wasn't 20mb in size I'd upload the pdf.

well here are the two main pictures and hope they help folks. At least they may help Kyle not have to keep drawing them for folks .

[Tigerfans2]

thank you!

[Deanofid]

Really good, Robert.

[Chucker]

Thanks Robert. That speaks volume's to one who has never figured out the F/A system.

[Gasman64]

Thank you for the diagrams, Robert.

[JimL]

Great diagrams, thanks. I found these cut-aways to be a major help also.
http://www.colemancollectorsforum.com/post/220228f-cutaways-6341220?highlight=cut+ways&pid=1278000103

[curlyjoe_99]

JimL wrote: Great diagrams, thanks. I found these cut-aways to be a major help also.
http://www.colemancollectorsforum.com/post/220228f-cutaways-6341220?highlight=cut+ways&pid=1278000103

Yeah those cut aways are awesome

and thanks for compliments, but I really just stumbled across these and wanted to share where they could be looked up in the archives

[JimDouglasJr]

Those will be infinitely helpful to pass on to newbies!

[Rhubarb]

Bumpity bump.

[Uncleduddley]

A really good picture is worth at least two thousand words!

[nfadude]

Nice cutaways

[JimL]

nfadude,

You really did an incredible job with this. I just looked at my post pointing it out and realize I failed to give you credit. I try to do that whenever I post the link to your work. Anyway, thank you for taking the time to do this detailed cut-away. It is very educational.